Test I

PINPOINT TEST I: LFC 24 AND 25/DTC B2294 - RESTRAINT SYSTEM SAFETY CANOPY MODULE STATUS

Test I1:

Test I2:

Test I3:

Test I4-I5:

Test I5-I7:

Test I8-I9:

Test I10-I11:

Test I11-I12:

Test I12-I13:

Test I13-I14:

Test I14-I16:

Test I16-I17:

Test I17-I18:

Normal Operation
The restraints control module (RCM) checks all safety canopy module circuits for faults. If the RCM detects one of the following faults on any of the safety canopy module circuits, it will store diagnostic trouble code (DTC) E2294 in memory and flash, depending on the fault, either lamp fault code (LFC) 24 or 25 depending on the fault (or higher priority code if one exists) on the air bag indicator.

Fault Conditions
The RCM monitors for the following fault conditions:
- low resistance.
- circuit open.
- circuit short to voltage.
- circuit short to ground.

possible Causes
A safety canopy module status fault can be caused by:
- damaged wiring, terminals, or connectors.
- a faulty safety canopy module.
- a faulted RCM.