Fill

Power Steering System Filling

WARNING: Do not mix fluid types. Any mixture or any unapproved fluid can lead to seal deterioration and leaks. A leak can ultimately cause loss of fluid, which can result in a loss of power steering assist.





1. Fill the power steering reservoir to the appropriate level.
2. Remove the ignition coil fuse to disable the engine from starting.
3. Raise the front wheels off the floor.

4. CAUTION: Do not operate the starter motor for more than 10 seconds at a time. Damage to the starter motor can result.

Turn the steering wheel from stop to stop while cranking the engine.
5. Lower the vehicle.





6. CAUTION: Do not overfill the power steering fluid reservoir.

Fill the power steering fluid reservoir to the appropriate level.
7. Install the ignition coil fuse.

8. NOTE: If the power steering its noisy and accompanied by evidence of aerated fluid it will be necessary to purge the power steering system.

Clear the Diagnostic Trouble Codes (DTCs).
^ Start the engine and check the system for leaks.