Reverse Planet Assembly
Reverse Planet AssemblyDisassembly
NOTE: Individual parts of the planet assemblies are not repairable.
1. Remove the No. 11 rear reverse planet thrust washer.
2. Remove the No. 10B front reverse planet thrust washer.
^ The pins and shafts in the planet assemblies should be checked for loose fit/damage. Use a new planet assembly if either condition exists.
^ Inspect the pinion gears for damaged or excessively worn teeth.
^ Check for free rotation of the pinion gears.
^ Check for damage in the overdrive planet assembly.
Assembly
1. Follow the disassembly procedure in reverse order.
^ Lightly lubricate the thrust washers with petroleum jelly to hold them in place during assembly.
^ The tabs on the thrust washers must engage the slots on the reverse planet assembly when installed.