Modes of Operation (How Does It Work?)

GLASS, FRAMES AND MECHANISMS
Power Window System / Modes of Operation
There are two modes of operation for the power window system.

Manual Mode
When the LH window control switch is pressed to the first down position, the window will move down until one of the following conditions are met:
- The LH window control switch is no longer in the first down position.
- The LH window control switch is pushed to the OTD position, causing the windows to enter auto mode.

Auto Mode
Auto mode provides the OTD feature. The OTD feature is activated when the LH window control switch, for the LH window, is pressed to the second down position.

Auto mode will be terminated when any of the following conditions are met:
- The LH window control switch is pushed to the UP position.
- The LH window control switch is released (OFF position) and then moved to the DOWN position (first detent) or OTD position (second detent).

NOTE: Delayed accessory feature must be active.

The OTD feature is controlled by the window control switch.

Rear Window Defrost
The rear window defrost is operated using the rear window defrost switch and is timed ON and OFF by the instrument cluster module (ICM).