Speaker Walk-Around Test
SPEAKER WALK-AROUND TESTNOTE: The audio unit must be turned ON and in radio tuner mode (AM/FM) to enter the speaker walk-around test.
1. To enter the speaker walk-around test, depress preset buttons 3 and 6 (1 and 4 for ULC only) simultaneously and hold approximately three seconds and release.
2. The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and shown on the display in the following sequence: RF, LF, LR, RR.
3. The speaker walk-around test automatically continues and tests. If the vehicle is not equipped with CD/DJ or if the CD/DJ is not responding, NO DJ will be displayed. To exit speaker walk-around test, turn the ignition switch OFF, turn the audio unit OFF, or preset button 1 for "DIA".