Selector Lever Indicator Adjustment
Selector Lever Indicator Adjustment1. Remove the upper instrument panel steering column cover.
2. Place the gearshift lever in the (D) position.
^ Rotate the gearshift lever clockwise until it bottoms out (1st gear). Rotate the lever 3 indents counterclockwise (D) for the TorqShift transmission.
3. Hang an 3-lb weight on the gearshift lever.
4. Center the pointer in the middle of the (D) position.
^ Rotate the thumbwheel located on the bottom of the steering column to adjust the pointer.
5. Remove the 3-lb weight.
6. Carefully move the gearshift lever from detent to detent and compare with transmission settings. Readjust if necessary.
7. Install the upper instrument panel steering column cover.