Headlamp: Service and Repair
HEADLAMP ASSEMBLYAero Headlamp Assembly:
Removal and Installation
NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
Vehicles with aero headlamps
1. Remove the 2 headlamp retainers and the headlamp assembly.
- Disconnect the electrical connector. Vehicles with low series headlamps
2. Remove the 2 screws and the headlamp door.
3. Remove the 4 screws and the headlamp retaining ring.
4. Disconnect the electrical connector and remove the headlamp.
All vehicles
5. To install, reverse the removal procedure.
- If necessary, adjust the headlamps.