Transmission Fluid Remote Filter

Transmission Fluid Remote Filter

Material:

Remote Fluid Filter Removal:

NOTE: The remote filter for this vehicle is located on the LH side of the transmission.

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the remote filter housing by unscrewing it.
3. Remove the spring/retainer and magnet assembly.
4. Remove and discard the remote filter element. Installation
1. Inspect the O-ring for damage (nicks or cuts). Install a new O-ring if damage is indicated.
2. Install a new remote filter element.
3. Clean the spring/retainer and magnet assembly and install it into the remote filter element.
4. Clean the remote filter housing and install.
^ Tighten to 50 Nm (37 ft. lbs.)
5. Fill with clean automatic transmission fluid.