Speaker Walk-Around Test

SPEAKER WALK-AROUND TEST

NOTE: To enter the speaker walk-around test or audio unit self-diagnostic mode, the audio unit must be turned on and in radio tuner mode (AM/FM).

1. To enter the speaker walk-around test, simultaneously press the audio unit preset buttons 3 and 6.
2. The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1 to 2 seconds. Each speaker is tested and displayed on the audio unit in the following sequence:
- Except THX(R): RF, LF, LR, RR, SUBWOOFER
- THX(R): CSA FRONT, TWEETER LF, TWEETER RF, CENTER REAR, SPEAKER LF, SPEAKER RF, SPEAKER LR, SUBWOOFER, SPEAKER RR

3. To exit the speaker walk-around test, turn the key to OFF, turn the audio unit off, or press preset button 1 for diagnostics.