Air Filter Element: Service and Repair
AIR CLEANER ELEMENTExploded View
Removal
1. Disconnect the battery ground cable.
2. Disconnect the air cleaner outlet pipe from the air cleaner cover.
- To install, tighten the clamps to 4 Nm (35 lb-in).
3. Disconnect the mass air flow (MAF) sensor electrical connector.
4. Release the retaining clips and position the air cleaner cover aside.
5. Remove the air cleaner element.
Installation
1. CAUTION: The air cleaner element must be fully seated into the air cleaner housing. Failure to do so will result in unusual engine noise.
To install, reverse the removal procedure.