Inspection and Verification

Inspection and Verification

NOTE: Prior to carrying out any diagnosis, make sure the red brake warning indicator is functional.

The first indication that something may be wrong in the brake system is a change in the feeling through the parking brake control. The parking brake not holding on an incline or dragging after being reTeased are also indicators of system concerns.

Check the operation of the parking brake system with the vehicle on a hoist and the parking brake control fully released. Check for any damaged cables and install new components as necessary. Check the rear brake adjustment or carry out the brake system diagnosis.

1. Verify the customer concern.

2. Visually inspect for obvious signs of mechanical damage.




Vehicle Inspection Chart

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, verify the symptom and refer to Symptom Chart. Symptom Related Diagnostic Procedures