Principles of Operation
PRINCIPLES OF OPERATIONThe following 5 distinct chime rates are used to indicate warning:
- Safety belt warning is 1 chime per second
- Key-in-ignition warning is 2 chimes per second
- Headlamps on warning is 4 chimes per second
- Door ajar warning is a single chime
- Air bag warning is 5 chimes per second
Safety Belt Warning Chime
The safety belt warning chime warns the driver safety belt is not fastened. The safety belt warning chime sounds when the driver safety belt is not fastened and when the ignition lock cylinder is turned from the OFF/LOCK or ACC to the ON or START position. The safety belt warning chime stops sounding if any of the following conditions is met:
- The safety belt is fastened
- The ignition lock cylinder is switched from the ON or START to the OFF/LOCK or ACC position
- The chime has sounded for 6 seconds
The safety belt warning chime inputs are the:
- Ignition switch position
- Driver safety belt switch
Safety Belt Minder
NOTE: The safety belt minder feature is configurable. To configure using the scan tool, refer to Information Bus (Module Communications Network). To configure without using the scan tool, refer to Safety Belt Minder Deactivating/Activating. Service and Repair
The safety belt minder feature supplements the current safety belt warning function. The safety belt minder feature is enabled after the current safety belt warning is complete. If the driver safety belt is not buckled approximately 5 seconds after the safety belt warning indicator has turned off, the safety belt minder reminds the driver that his/her safety belt is unbuckled by intermittently sounding a chime and illuminating the safety belt warning lamp in the instrument cluster. While activated, the safety belt minder alternates the chime and indicator from on for 6 seconds to off for 30 seconds.
The belt minder reminder stops if any of the following conditions is met:
- The driver safety belt is buckled
- The ignition lock cylinder is turned to the OFF or ACC position
- Five minutes have elapsed since the belt minder has started
Door Ajar Warning Chime
The door ajar warning chime warns that a door has become ajar. The door ajar warning chime is a single tone with the duration of 1 second. The tone sounds when the driver or passenger door initially becomes ajar while the ignition lock cylinder is in the ON position.
The door ajar warning chime inputs are the:
- Ignition switch position
- Door ajar switches
Key-In-Ignition Warning Chime
The key-in-ignition warning chime warns that the key is in the ignition lock cylinder when the driver door is ajar. The key-in-ignition warning chime sounds when:
- the driver door is ajar, the ignition lock cylinder is in the OFF/LOCK or ACC position, and the key is in the ignition lock cylinder.
The key-in-ignition warning chime stops sounding if any of the following conditions is met:
- The driver door is closed
- The key is removed from the ignition lock cylinder
- The ignition lock cylinder is turned to the RUN position
The key-in-ignition warning chime inputs are the:
- Ignition switch position
- Key-in-ignition warning switch (part of the ignition switch)
- LH door ajar switch
Headlamps On Warning Chime
The headlamps on warning chime warns that the headlamps are on when all the following conditions are met:
- The driver door is ajar
- The headlamp switch is in the PARK or HEADLAMPS position
- The ignition lock cylinder is in the OFF/LOCK position
- The key is out of the ignition lock cylinder
The headlamps on warning chime stops sounding when any one of the conditions above are removed.
The headlamps on warning chime inputs are the:
- Ignition switch position
- Headlamp switch position
- Driver door ajar switch
- Key-in-ignition warning switch
Air Bag Warning Chime
The air bag warning chime warns that the air bag warning indicator is inoperative or an active fault is present within the air bag system. The audible warning format consists of 5 sets of tones in 1 second increments.
The air bag warning chime input is the restraints control module (RCM).