Operation CHARM: Car repair manuals for everyone.

Transmission Control (TC) Switch - Floor Shift

Transmission Control (TC) Switch - Floor Shift

Removal
1. Lift the center console lid cover and remove the console finish panel.





2. Depress the bottom of the button. Using a suitable tool, pry forward on the top of the selector lever button and remove the button.





3. Remove the screw, slide the selector lever knob up and remove the selector lever knob.





4. Remove the selector lever knob shroud.





5. Disconnect the transmission control (TC) switch electrical connector, release the selector lever bezel locking tabs and remove the selector lever bezel from the selector lever.





6. Release the 2 tabs and push the TC switch through the selector lever bezel.





Installation
1. Install the TC switch in the selector lever bezel.





2. Install the selector lever bezel on the locking tabs and connect the TC switch electrical connector.





3. Install the selector lever knob shroud.





4. CAUTION: Do not overtighten the screw or damage to the selector lever knob can occur.

Install the selector lever knob and install the screw.





5. Position the selector lever button in place and press in on the top of the button to install.





6. Install the center console finish panel.