Initial Inspection and Diagnostic Overview

INSPECTION AND VERIFICATION

1. Verify the customer concern by operating the safety belts.

Visual Inspection Chart:

2. Visually inspect for obvious signs of mechanical and electrical damage. Refer to the chart:
3. If the inspection reveals an obvious concern(s) that can be readily identified, service as required. With the exception of removing a twist from the safety belt webbing, do not attempt to repair a component of the safety belt system; new components must be installed.
4. If the concern remains after the inspection, determine the symptom. GO to Symptom Chart. Symptom Related Diagnostic Procedures
5. To check the active restraint system for correct operation, carry out the appropriate Functional Test(s). Component Tests and General Diagnostics