Front Door: Service and Repair

DOOR







Removal and Installation
1. Disconnect the front door electrical connector at the A-pillar.







2. Remove the 2 door check-to-door bolts.
- To install, tighten to 11 Nm (8 lb-ft).







3. CAUTION:
- To minimize the possibility of cross threading, hand-start all fasteners during installation.
- To avoid damaging the door, this step requires an assistant.

Remove the hinge-to-door bolts.
- To install, tighten to 30 Nm (22 lb-ft).







4. Remove the door.
5. To install, reverse the removal procedure.