Test B: Adjustable Brake Pedal Is Inoperative/Does Not Operate Correctly (System Without Memory Feature)

Pinpoint Test B: Adjustable Brake Pedal is Inoperative/Does Not Operate Correctly (System Without Memory Feature)
Refer to Vehicle/Diagrams, Adjustable Pedals for schematic and connector information.

Normal Operation
The adjustable pedal switch receives fused battery voltage from smart junction box (SJB) fuse 20 (15A) along circuit SBP20 (GN/RD).

When the adjustable pedal switch is pressed in the forward position (away from the driver), the switch connects circuit SBP20 (GN/RD) with circuit CPP10 (BN/BU) and the voltage is sent to the adjustable pedal motor along circuit CPP10 (BN/BU). The voltage returns to the switch along circuit CPP09 (VT/OG) and is grounded through the switch along circuit GD115 (BK/GY).

When the adjustable pedal switch is pressed in the rearward position (toward the driver), the switch connects circuit SBP20 (GN/RD) with circuit CPP09 (VT/OG) and the voltage is sent to the adjustable pedal motor along circuit CPP09 (VT/OG). The voltage returns to the switch along circuit CPP10 (BN/BU) and is grounded through the switch along circuit GD 115 (BK/GY).

This pinpoint test is intended to diagnose the following:
^ Fuse
^ Wiring, terminals and connectors
^ Foreign material
^ Adjustable pedal cable
^ Adjustable pedal switch
^ Adjustable pedal motor
^ Adjustable brake pedal assembly
^ Adjustable accelerator pedal assembly

B1-B2:

B3-B7:

B8-B11:

B11 (Continued):