Air Cleaner Housing: Service and Repair

AIR CLEANER

Part 1:

Part 2:

Part 1:

Part 2:

Part 1:

Part 2:

Part 1:

Part 2:

Exploded View

Removal and Installation
1. Disconnect the restriction gauge and mass air flow (MAF) sensor electrical connectors.
2. Loosen the clamp and disconnect the air cleaner outlet pipe from the air cleaner.
- To install, tighten to 5 Nm (44 lb-in).

3. Disconnect the secondary air intake hose from the air cleaner outlet housing.
4. Pull up on the air cleaner to remove it from the air cleaner support bracket.
5. To install, reverse the removal procedure.