Test H: DTC B106B - Tire Pressure Sensor Low Battery

Pinpoint Test H: DTC B106B - Tire Pressure Sensor Low Battery
This pinpoint test is intended to diagnose the following:
If there is a fault in the tire pressure monitoring system (TPMS), such as a damaged or missing sensor(s), damaged module or a communication issue within the vehicle, DTCs are set in the smart junction box (SJB), the TPMS warning indicator will flash for 70 seconds and then remain ON solid when the ignition switch is turned to the ON position and the message center (if equipped) will display TIRE PRESSURE SENSOR FAULT.

The tire pressure sensor is battery powered.

This DTC may be set when attempting to train a tire pressure sensor(s) with a low battery.

This pinpoint test is intended to diagnose the following:
^ Tire pressure sensor battery
^ Tire pressure sensor(s)

H1: