Intermediate One-Way Clutch

Intermediate One-Way Clutch

Intermediate Clutch Cylinder Disassembled View









Disassembly

1. NOTE: One tab that locks the reverse clutch drum into the reverse sun shell may be removed. This is done for balancing purposes.

NOTE: If the retaining ring shows signs of distortion or expansion, replace the intermediate one-way rocker clutch and retaining ring.

Remove the intermediate one-way rocker clutch.

1. Remove the inner retaining ring.

2. Remove the intermediate one-way rocker clutch.





Assembly

1. NOTE: The intermediate one-way rocker clutch must rotate counterclockwise when installed on the reverse clutch drum and will make a ratchet sound.

Install the intermediate one-way rocker clutch.

1. Install the intermediate one-way rocker clutch.

2. Install the inner retaining ring.