150000 MI or 240000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness, or drag.
    Vehicle
      Recommended Multi-point Inspection
    Universal Joint, Drive/Propeller Shaft
      If equipped.
    Tie Rod End
      Inspect tie rod ends (lubricate if equipped with Zerk fittings)
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive/Propeller Shaft
      If equipped.
    Cooling System
      Every 15,000 miles (24,000 km), 600 hours of engine operation or as indicated by the instrument cluster message center
    Constant Velocity Joint Boot
      If equipped.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system.
    Ball Joint
      If equipped.
    Axle Joint
      Inspect and lubricate 4x4 front axle U-joints.
Replace
    Wheel Bearing
      Replace front wheel bearings and seals on 4x2 vehicles (If non-sealed bearings are used)
    Fluid Filter - A/T
      Change automatic transmission fluid filter (except for 6F35, 6F50, AWF-21, FNR5 and TorqShift transmissions).
    Fluid - Transfer Case
      (4WD vehicles).
    Fluid - M/T
      Change manual transmission fluid.
    Fluid - A/T
      Change automatic transmission fluid (except for 6F35, 6F50, AWF-21, FNR5 and TorqShift transmissions).
    Filters
      Climate-controlled seat filter
    Engine Oil
      Change engine oil and filter.
    Drive Belt
      Replace accessory drive belt(s) if not replaced in the last 100,000 miles (160,000 km).
    Coolant
      Change engine coolant.
    Cabin Air Filter / Purifier
      Replace cabin air filter (if equipped)
    Air Filter Element
      Replace engine air filter.
Rotate
    Tires
      Rotate tires, inspect for wear and measure tread depth.