Torqshift(R)6
Output Shaft Speed (OSS) Sensor
Removal
1. Remove the transmission fluid pan. For additional information, refer to Transmission Fluid Pan Transmission Fluid Pan - Torqshift(R)6.
2. Disconnect the Output Shaft Speed (OSS) sensor electrical connector.
3. Remove the bolt and remove the OSS sensor.
Installation
1. Install the OSS sensor and install the bolt.
- Tighten to 11 Nm (97 lb-in).
2. Connect the OSS sensor electrical connector.
3. Install the transmission fluid pan. For additional information, refer to Transmission Fluid Pan Transmission Fluid Pan - Torqshift(R)6.