Torqshift(R)6
Turbine Shaft Speed (TSS) Sensor
Removal
1. Remove the main control. For additional information, refer to Main Control Torqshift(R)6.
2. Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector.
3. Remove the bolt and remove the TSS sensor.
Installation
1. Install the TSS sensor and install the bolt.
- Tighten to 11 Nm (97 lb-in).
2. Connect the TSS sensor electrical connector.
3. Install the main control. For additional information, refer to Main Control Torqshift(R)6.