Air Flow Meter/Sensor: Service and Repair

4-116 Engine

1. Disconnect outlet hose from vane air meter and position aside.
2. Remove air intake tube from air cleaner.
3. Unfasten two spring clamps and position air cleaner front cover and filter away from rear tray.
4. Remove four air cleaner tray flange-to-air meter attaching screws, then move tray away from air meter. Remove and replace gasket, if necessary.
5. Disconnect electrical connector from air meter.
6. Remove air meter attaching screws and the air meter.
7. Reverse procedure to install. Torque air cleaner tray attaching screws to 33 - 49 inch lbs. and air meter attaching screws to 6 - 9 ft. lbs.