Cylinder Block Assembly: Service and Repair

NOTE: Before replacing a cylinder block, determine if it is repairable. If so, make the necessary repairs.

DISASSEMBLY
1. Mount the old engine in a work stand. Completely disassemble the old engine. Remove all parts not furnished with the new cylinder block assembly.
2. Remember to ridge-ream the cylinder bores before removing piston assemblies.
3. Remove the old cylinder block assembly from the work stand.

ASSEMBLY
1. Clean the gasket and seal surfaces of all serviceable parts and assemblies.
2. Position the new cylinder block assembly in a work stand.
3. Transfer all serviceable parts removed from the old cylinder block assembly.
4. Check all assembly clearances.