Measurement Specifications

Piston Pin Bore or Bushing (Inside Diameter) 0.9096 - 0.9112 inch
Rod Length Center to Center 5.9545 - 5.9575 inch
Connecting Rod Alignment Maximum Total Difference
Twist (desired) 0.024 inch
Twist (allowable) 0.023 inch
Bend [1] 0.012 inch
Rod To Crankshaft Assembled Side Clearance 0.010 - 0.020 inch
Allowable 0.023 inch
Connecting Rod Journal
Diameter 2.3103 - 2.3111 inch
Maximum out-of-round 0.0006 inch
Taper per inch maximum 0.0006 inch



[1] Pin bushing and crankshaft bore must be parallel and in the same vertical plane with specified total difference when measured at the ends of an 8-inch long bar, 4-inches on each side of rod centerline.