Starter Motor: Service and Repair

If the starter motor is noisy or if it locks up, before condemning the starter, loosen the mounting bolts enough to hand fit the starter properly into the pilot plate. Tighten the mounting bolts, starting with the top one.
1. Disconnect battery ground cable, then the starter electrical cable.
2. Remove cable support and ground cable connection from upper starter stud bolt.
3. Remove starter brace from cylinder block and starter.
4. Remove starter mounting bolts, then on models equipped with auto. trans., remove starter from between sub-frame and radiator. On models equipped with man. trans., remove starter from between sub-frame and engine.
5. Reverse procedure to install.