Rebuild Specifications

Surface Finish (RMS) 0.4 micrometers (0.157 micro in.) FRONT
Surface Finish (RMS) 0.4 micrometers (0.157 micro in.) REAR
Runout Limit 0.025 mm (0.001 in.)
Connecting Rod Bearings
Clearance to Crankshaft Desired 0.025-0.035 mm (0.001-0.0014 in.)
Clearance to Crankshaft Allowable 0.020-0.066 mm (0.00086-0.0027 in.)
Main Bearings Clearance to Crankshaft (Desired) 0.025-.035 mm (0.001-0.0014 in.)
Main Bearings Clearance to Crankshaft (Allowable) 0.020-.066 mm (0.00050.0023 in.)
Main Bearing Wall Thickness (Std.) 2.444-2.481 mm 1st and 2nd
Main Bearing Wall Thickness (Std.) 2.491-2.427 mm 3rd and Rear