Tightening Specifications
| SPECIFIC TORQUE APPLICATION CHART | Connecting Rod Nut | 55-61 | |
| Cylinder Front Cover | 17-24 | ||
| Cylinder Head Bolts | 1st step | 67-75 | |
| 2nd step | 82-88 | ||
| 3rd step | 94-115 | ||
| Damper to Crankshaft | 177-203 | ||
| EGR Valve to Carburetor Spacer or Intake Manifold | 17-24 | ||
| Flywheel to Crankshaft | 102-115 | ||
| Main Bearing Cap Bolts | 82-94 | ||
| Manifold to Cylinder Head - Intake (2) | 30-43 | ||
| Manifold to Cylinder Head - Exhaust (2) | 30-43 | ||
| Oil Filter Insert to Cylinder Block/Adapter | 20-48 | ||
| Oil Filter Adapter to Cylinder Block | 55-67 | ||
| Oil Filter to Adapter or Cylinder Block 1/2 Turn after Gasket Contacts Sealing Surface - Oiled Gasket. | |||
| Oil Inlet Tube to Pump | 14-20 | ||
| Oil Pan Drain Plug | 21-33 | ||
| Oil Pan to Cylinder Block (2) | 14-17 | ||
| Oil Pump to Cylinder Block | 14-20 | ||
| Oil Inlet Tube to Main Bearing Cap | 30-43 | ||
| Pulley to Damper Bolt | 48-67 | ||
| Rocker Arm Bolt | 24-31 | ||
| Spark Plug to Cylinder Head | 14-20 | ||
| Valve Rocker Arm Cover | 7.9-11.9 | ||
| Valve Push Rod - Cover to Cylinder Block | 2.8-3.9 | ||
| Water Outlet Housing | 17-24 | ||
| Water Pump to Block/Front Cover | 17-24 | ||
| Alternator Bracket to Cylinder Block Bolt | 41-61 | ||
| Alternator Adjusting Arm to Cylinder Block Bolt | 26-36 | ||
| Alternator Adjusting Arm to Alternator Bolt | 33-54 | ||
| Thermactor Pump Pivot Bolt | 41-48 | ||
| Thermactor Pump Adjusting Arm to Pump | 30-43 | ||
| Thermactor Pump Pulley to Pump Hub | 17-24 | ||
| Thermactor Pump Bracket to Cylinder Block | 30-43 | ||
| Fuel Filter to Carburetor/Pump | 10-11 | ||
| Carburetor Attaching Nuts | 17-20 | ||
| Camshaft Thrust Plate to Cylinder Block | 16-24 | ||
| Fuel Pump to Cylinder Block/Front Cover | 17-24 | ||
| Carburetor Mounting Stud | 7-13 | ||
| Distributor Clampdown | 24-33 | ||
| Intake Manifold Vacuum Fittings | 8-13 | ||
| Timing Pointer to Front Cover | 17-24 | ||
| Thermactor Air Manifold to Cylinder Head (Nut and Ferrule Assembly) | 19-22 | ||
| Thermactor Air Check Valve to Thermactor Air Manifold | 22-26 | ||
| Pressure Plate and Cover Assembly to Flywheel | 16-25 | ||
| Lower Intake Manifold to Head | 30-43 | ||
| EGR Tube | 33.8-47.5 | ||
| EGR Valve to Upper Intake Manifold | 17-25 | ||
| Cooling Manifold | 4-5.6 | ||
| Upper Intake Manifold to Lower Intake Manifold Bolts | 16.2-24.4 | ||
| Throttle Body to Upper Intake Manifold | 16-24 | ||
| Air Bypass Valve to Throttle Body | 8-11 | ||
| Throttle Position Sensor to Throttle Body | 2-3 | ||
| Fuel Pressure Regulator to Injector Manifold | 3-4.5 | ||
| Fuel Injector Manifold to Fuel Charging Assembly | 16-20 | ||
| Coil Bracket to Manifold Stud | 5.9-7.4 | ||
| Throttle Cable Bracket to Manifold | 11-13 | ||
| Air Door Bracket to A/C Cleaner | 7.9-11.2 | ||
| STANDARD TORQUE CHART | 1/4-20 | 8-12 | |
| 5/16-18 | 17-24 | ||
| 5/16-24 | 19-27 | ||
| 3/8-16 | 30-43 | ||
| 3/8-24 | 37-51 | ||
| 7/16-14 | 61-77 | ||
| 7/16-20 | 55-81 | ||
| 1/2-13 | 75-81 | ||
| 9/16-18 | 116-162 | ||
| PIPE THREADS | 1/8-27 | 7-11 | |
| 1/4-18 | 17-24 | ||
| 3/8-18 | 30-44 | ||
| 1/2-14 | 34-47 |