Vehicle Damage Warnings

1. Grease or any other foreign material must be kept off the caliper, surfaces of the disc and external surfaces of the hub, during service procedures. Handling the brake disc and caliper should be done in a way to avoid deformation of the disc and nicking or scratching brake linings.
2. If inspection reveals rubber piston seals are worn or damaged, they should be replaced immediately.
3. During removal and installation of a wheel assembly, exercise care so as not to interfere with or damage the caliper splash shield, or bleeder screw.
4. Front wheel bearings should be adjusted to specifications.
5. Be sure vehicle is centered on hoist before servicing any of the front end components to avoid bending or damaging the disc splash shield on full right or left wheel turns.
6. Before the vehicle is moved after any brake service work, be sure to obtain a firm brake pedal.
7. The assembly bolts of the two caliper housings should not be disturbed unless the caliper requires service.