Ignition System: Service and Repair

Distributor Cap and Rotor
1. Wash distributor Cap with soapy water and dry with compressed air. Inspect cap for broken carbon button, cracks, carbon tracking, dirt, or corrosion. Replace cap if damaged.
2. Use a clean cloth to wipe rotor. Inspect and replace if carbon tracking, burns or cracks are noticed. Inspect cap gasket for damage and replace if necessary.


Distributor, Non-Turbo Engine
1. Use clean soft cloth to wipe all parts.
2. Inspect O-rings for damage or wear. Replace if necessary.
3. Inspect base of distributor for damage or wear.
4. Check for looseness or binding at lower shaft. Lubricate all pivoting and sliding surfaces.
5. Apply thin, even layer of silicone to module mounting face.