Diagnostic Tools

The following tools are necessary to perform Quick or Pinpoint test procedures. Only the tools described here or suitable equivalents should be used to troubleshoot and diagnosis system problems. To use other tools not specified here, will only lead to inaccurate test results, personal injury or vehicle/system damage.
1. Rotunda self-test automatic readout (super star II tester) No. 007-00028 with cable assembly No. 007-00036.
2. Analog volt/ohmmeter No. 059-00010, 0---20 volts DC capability (this tool is an alternative to the super star II tester).
3. Jumper wire.
4. Vacuum gauge (Rotunda 059-00008 or equivalent). If an equivalent vacuum gauge is used, the gauge range should be 0---30 inches Hg (resolution 1 inch Hg).
5. Tachometer (Rotunda No. 059-00010 or equivalent. Range 0---6000 RPM.
6. Breakout box (Rotunda No. 014-00322, special service tool T83L-50-EEC-IV or equivalent). With adapter cable No. 007-00038.
7. Vacuum pump (Rotunda No. 021-00037 or equivalent). Range 0---30 inches Hg.
8. Digital volt/ohmmeter (Rotunda No. 014-00407 or equivalent). Input impedance 10 mega-ohm minimum is required for equivalents.
9. Electronic fuel injection pressure gauge EFI/CFI only (Rotunda No. 014-00447 or equivalent).
10. Spark test No. D81P-6666-A or equivalent.
11. Timing light and a non-powered test lamp.