Fillpipe Restrictor: Service and Repair

REMOVAL
1. Loosen screw attaching fuel filler hose to tank.
2. Remove fuel cap from fuel filler pipe assembly.
3. Remove three screws attaching tether (non-locking caps only) and filler pipe assembly.
4. Detach fuel filler system from tank spud and remove through frame rail/body side void.

Fuel Filler System:

INSTALLATION
1. Attach fuel filler system to tank spud.
2. Replace three screws attaching tether (nonlocking caps only) and the filler pipe to body housing. Tighten screws. Refer to SPECIFICATIONS.
3. Attach fuel cap to fuel filler pipe assembly.
4. Tighten screw clamp attaching fuel filler hose. Refer to SPECIFICATIONS.