Axle Shaft Removal

Differential:

1. Clean all dirt from the area of carrier cover with a wire brush and/or cloth. Drain rear axle lubricant by removing the housing cover. Remove differential pinion shaft lock bolt and differential pinion shaft.

Side Gear Removal:

2. Push the flanged end of the axle shafts inboard and remove the C-lock from the button end of each axle shaft.

NOTE: Use care not to lose or damage the rubber 0-ring which is in the axle shaft groove under the C-lock.




3. Remove the axle shaft from the housing, being careful not to damage the oil seal.