Pinion Bearing Cup Installation

1. Place the required amount of preload shims under the inner cup as shown.

2. Place the inner and outer bearing cups into the carrier bore.




3. Place the Inner Bearing Cup Replacer Tool on the inner bearing cup. For Model 60 and 70-2U axles, use T56T-4616-B2. For Model 70-1 HD and 80 axles, use D81T-4616-A.

4. Place the Outer Bearing Cup Replacer Tool on the outer bearing cup. For Model 60 and 70 use T56T-4616-B1. For Model 80 axles, use T67P-4616-A.

5. Install the Threaded Drawbar, T75T-1176-A into the replacer tools and tighten the drawbar to install the cups into the carrier bore.