Fuel Reservoir: Service and Repair

NOTE: The removal of the transmission crossmember on the 138 inch wheelbase vehicles requires that the fuel reservoir be removed first. If the reservoir is not removed before removal and/or installation of the transmission crossmember, interference will occur and damage to the reservoir may occur. Removal of the reservoir is not required for removal of the E40D transmission crossmember.

REMOVAL
1. Disconnect the fuel lines from the fuel reservoir (single or dual function).

2. Remove the four bolts which hold the reservoir bracket to the frame.

INSTALLATION

1. Install the fuel reservoir and bracket assembly. Tighten the four attaching bolts. Refer to SPECIFICATIONS.
2. Prepare the push connect fittings on the disconnected fuel lines for installation and install the fuel lines as outlined.