With AOD

Fig. 3 Shift Linkage:

Fig. 4 Shift Linkage:

1. Place transmission selector lever on steering column into Drive (Overdrive) position. Secure lever in this position.
2. Loosen shift rod adjusting nut at point A, Figs. 3 and 4.
3. Place manual lever on transmission into Drive (Overdrive) position by moving lever completely rearward, then forward 2 detents.
4. With selector lever and transmission manual lever in Drive (Overdrive) position, torque adjusting nut at point A to 12-18 ft. lbs.