Wheel Bearing and Oil Seal Installation

Installing Wheel Bearing:

1. Lubricate the new bearing with rear axle lubricant and install the bearing into the housing bore using Axle Bearing Replacer T83T-1225-B or equivalent.

Installing Grease Seal:

2. Coat the lips of the seal with Long-Life Lubricant, C1AZ-19590-BA (ESA-M1C75-B) or equivalent and install the axle shaft seal using Grease Seal Replacer T83T-1175-A.

CAUTION: Installation of the bearing or seal assembly without the proper tool may result In an early bearing or seal failure. If seal becomes cocked in the bore during installation, remove it and install a new one.