Wheel Hub/Rotor Assembly - Removal Revision

9207ford02

Article No.
91-25B-13

12/20/91


^ SHOP MANUAL - 1988 - PAGE 11-16-7 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD ASSEMBLY REVISED

^ SHOP MANUAL - 1989 - PAGE 11-16-7 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD ASSEMBLY REVISED

^ SHOP MANUAL - 1990 - PAGE 11-16-7 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD ASSEMBLY REVISED

^ SHOP MANUAL - 1991 - PAGE 04-01-12 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD ASSEMBLY REVISED

^ SHOP MANUAL - 1992 - PAGE 04-01-11 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD ASSEMBLY REVISED


FORD: 1988-92 FESTIVA


ISSUE: The procedure for removal of the Wheel Hub/Rotor Assembly from the Steering Knuckle Dust Shield Assembly must be revised to indicate that tool T87C-1104-A Knuckle Puller must be modified. The following Shop Manuals are affected on the pages indicated:





^ 1988 Festiva, Page 11-16-7
^ 1989 Festiva, Page 11-16-7





^ 1990 Festiva, Page 11-16-7





^ 1991 Festiva, Page 04-01-12








^ 1992 Festiva, Page 04-01-11


ACTION: Refer to the pages in this TSB article for the revised information.

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 390000