Connecting Rod Bearing

Connecting Rod Journal Diameter 2.0462-2.0472 inch
Connecting Rod Journal Out-of-Round Limit 0.0006 inch (Max)
Connecting Rod Journal Taper Limit 0.0006 Per Inch (Max)
Connecting Rod Journal Surface Finish (RMS) 12 (Max)
Connecting Rod Bearings Clearance to Crankshaft - Desired 0.0008-0.0015 inch
Connecting Rod Bearings Clearance to Crankshaft - Allowable 0.0008-0.0026 inch
Connecting Rod Bearing Wall Thickness (Standard) 0.0619-0.0624 inch
If 0.002 Undersize, Add 0.001 to Standard Thickness.
Connecting Rod:
Piston Pin Bore Diameter 23.104-23.145 mm (0.9096-0.9112 in.)
Crankshaft Bearing Bore Diameter 55.170-55.190 mm (2.1720-2.1728 in.)
Crankshaft Bearing Bore Out-of-Round Limit 0.0004 inch
Crankshaft Bearing Bore Taper Limit 0.0004 inch