Emission Control Systems: Adjustments

Idle Speed Setting:

1. Disconnect idle speed control-air bypass solenoid.
2. With transmission in Neutral or Park, run engine at 2500 rpm/30 seconds
3. Place automatic transmission in Park manual transmission in Neutral.
4. Check/adjust idle rpm:
Turn the throttle plate stop screw to 675 rpm.
5. Shut engine off and repeat Steps 2, 3, and 4.
6. Shut engine off and disconnect battery for a minimum of 5 minutes.
7. Engine off reconnect idle speed control-air bypass solenoid, verify the throttle is not stuck in the bore and linkage not preventing throttle from closing.
8. Start engine and stabilize for 2 minutes then goose engine and let it return to idle, lightly depress and release the accelerator. Let engine idle, if problem exists, refer to COMPUTER ENGINE CONTROLS/DIAGNOSTIC ROUTINES for other possible causes.