Mechanical Specifications

BELT TENSIONS
New Belt (0 minutes Operation) 50-90 lbs. (222-400 N)
Used Belt Tension (10+ minutes Operation) 40-60 lbs. (177-266 N)
Allowable Minimum Tension 40 lbs. (177 N)


TORQUE VALUES
Air Bypass Valve to Throttle Body 84 lb. in. (9.5 Nm)
Air Supply Tube Clamps 22 lb. in. (3.0 Nm)
Automatic Belt Tensioner Bolts 30-40 lb.ft. (40-55 Nm)
Canister Mounting Bracket Bolts 6-9 lb.ft. (8-12 Nm)
Charcoal Canister Retaining Bolts 4-6 lb.ft. (4-6 Nm)
Converter Pipe to Muffler/Outlet Pipe Assembly 28-31 lb.ft. (37-42 Nm)
Exhaust Manifold to Cylinder Head 20-30 lb.ft. (27-41 Nm)
Idler Pulley Pivot Bolt 30-40 lb.ft. (40-55 Nm)
Idler Pulley Adjusting Bolt 30-40 lb.ft. (40-55 Nm)
Inlet Pipe to Exhaust Manifold 25-34 lb.ft. (34-46 Nm)
Oxygen Sensor 30-35 lb.ft. (40-50 Nm)
Throttle Body to Upper Intake Manifold 6-10 lb.ft. (8-12 Nm)
Vacuum Fitting to Intake Manifold 26-33 lb.ft. (35-45 Nm)
Y-pipe to converter pipe 28-31 lb.ft. (37-42 Nm)