Ignition Coil: Service and Repair

Coil Pack Assembly:

REMOVAL:

1. Disconnect the negative battery cable.
2. Disconnect the electrical connector from the coil pack.
3. Remove the spark plug wires by squeezing the locking tabs to release the coil boot retainers.
4. Remove the coil pack mounting screws and remove the coil pack.


INSTALLATION:

1. Install the coil pack and mounting screws, and tighten to specified torque. (SEE SPECIFICATIONS/MECHANICAL)
2. Connect the spark plug wires and connect the electrical connector to the coil pack.
3. Connect the negative battery cable.