Attachment II - Labor and Parts Info.

LABOR ALLOWANCE ATTACHMENT II
Emissions Recall 91E11

Replace the Electronic Engine Control (EEC) Processor, Prepare and Attach the Authorized Modifications Decal.

0.8 Hrs. - insert in Box "B" on Form 1864

Note: Add 0.1 Hour Administrative Allowance to the total repair time.

PARTS REQUIREMENTS

Parts will not be direct shipped for this recall. Order your parts requirements through normal order processing channels.

NOTE: LESS THAN 500 TRUCKS ARE INVOLVED IN THIS RECALL. PLEASE ASSURE THAT YOU HAVE INVOLVED OWNERS BEFORE YOU ORDER PART KITS.


PART

NUMBER DESCRIPTION CLASS EXCHANGE PRICE

F1TZ-12A650-XX Kit, EEC Processor WG $125.00
Trucks Having Engine Calibration Code 1-54P-R11

F1TZ-12A650-YY Kit, EEC Processor CG 125.00
Trucks Having Engine Calibration Code 1-54X-Rll

Part prices are current until the next issue of the Master Price Book. For the latest price(s), call an Order Processing Center or check an updated Master Price Book or DOES II.

CLAIM PREPARATION

In the MISC/TOW box on the 1864 claim, insert $100.00 for the processor core credit charge.

PARTS RETURN INSTRUCTIONS

A "Blue" FPS-700 Parts Disposition tag will be issued to recall the removed electronic engine control (EEC) processor. Return of the processors with the FPS-700 tag attached must be shipped prepaid freight to the address shown on the reverse side of the tag. Insert prepaid freight charges on an 1863 claim (Refer to Warranty and Policy Manual, Section 6.1, page 33).

Refer to the part return shipping procedure in Section 7.0, pages 10 and 11, of the Warranty and Policy Manual.

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from Ford Parts and Service Division in accordance with Policy Procedure Bulletin 4000.





Attachment II A1 TECHNICAL INFO - REPAIR CODE A





Attachment III A2 - Modification Decal





Attachment II B1 - Repair Code B





Attachment III B2 - Modification Decal