Throttle Position Sensor: Specifications

IDLE SPEED 475-575 rpm


TORQUE VALUES
Accelerator Cable Bracket 13.5-20.5 Nm (10-15 ft lbs.)
Air Bypass Valve to Throttle Body 8-11.5 Nm (6-8.5 ft lbs.)
Air Supply Tube Clamps 1.7-2.6 Nm (15-23 in lbs)
EGR Tube 25-35 Nm (18-28 ft lbs.)
Engine Oil Dipstick 20-30 Nm (15-22.5 ft lbs)
Fuel Filter Bracket Clamp 1.7- 2.8 Nm (1 5-25 in lbs)
Fuel Gauge Unit Installation ring 81-115 Nm (60-85 ft lbs)
Fuel Pressure Regulator to Injector Manifold 3-4.5 Nm (26-40 in lbs)
Fuel Pressure Relief Valve 5.5-9.5 Nm (4.1-7.0 ft lbs)
Fuel Pressure Relief Valve Cap 0.5-0.7 Nm (4-6 in lbs)
Fuel Supply Manifold to Fuel Charging Assembly 20-30 Nm (15-22 ft lbs)
Lower Intake Manifold to Head 20-30 Nm (15-22 ft lbs)
Throttle Body to Upper Intake Manifold 16-20 Nm (12-15 ft lbs)
Throttle Position Sensor to Throttle Body 1.6-1.8 Nm (14-15 in lbs)
Upper Intake Manifold Vacuum Tee 16-24 Nm (12-18 ft lbs)
Upper Int. Manifold to Lower Int. Manifold Bolts 20-30 Nm (15-22.5 ft lbs)
Water Bypass line 1.4-2.2 Nm (12-20 in lbs)