Steering Control Module: Service and Repair

With Anti-Lock Brakes

1. Turn ignition switch Off.
2. Locate module tray in luggage compartment, behind LH rear seat.
3. Disengage push-pin on LH side of tray, then swing tray down.
4. Release locking tabs retaining control module to tray, then remove control module.
5. Disconnect electrical connector from module.
6. Reverse procedure to install.

Less Anti-Lock Brakes

1. Turn ignition switch Off.
2. Locate module tray in luggage compartment, behind LH rear seat under package tray.
3. Disconnect electrical connector from module.
4. Unscrew two plastic rivets on sides of module, then pull down rivet and head assembly from module.
5. Remove control module from mounting bracket.
6. Reverse procedure to install.