Parts Replacement Notes

PARTS REPLACEMENT

NOTE:
- The various major assemblies in the air bag system have been designed to be tamper-resistant and are not to be disassembled for service. Component assemblies may be removed and replaced as required by diagnosis and testing.
- Original parts should be re-installed in the vehicle if replacement parts have no effect on the repair.

STEERING COLUMN
After an accident involving air bag deployment, the steering column may have been loaded sufficiently to deform steering column mounting brackets or damage wiring. An inspection should be made of the column structure and air bag sliding contact wiring to make sure that any damaged components are replaced.

AIR BAG MODULES
Information on safe and effective replacement for supplemental air bag restraint system components and handling are provided for complete and effective service of the supplemental air bag restraint system.





When replacing driver side air bag module, a prepaid return postcard is provided with the replacement driver side air bag module. The serial number for the new part and VIN number must be recorded and sent to Ford Motor Company.

AIR BAG SYSTEM
Prior to attempting diagnostic prove-out on a serviced vehicle, thoroughly check all sensors and wiring for damage and pinched condition which may cause the diagnostic module internal fuse to blow.