Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1993 >> F 150 4WD Pickup L6-300 4.9L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> C6 Transmission
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

C6 Transmission



Park/Neutral Position (PNP) Switch

TRANSMISSION OUT OF VEHICLE

Removal and Installation

1. Using the neutral start switch socket Tool T74P077247-A remove the PNP switch from the case.

2. Remove the O-ring seal and discard.

3. Install a new seal on the PNP switch.

4. Lube seal with transmission fluid.

5. Install the PNP switch in the case using the neutral start switch socket Tool T74P-77247-A. Tighten to 11-15 Nm (8-11 ft-lb).

TRANSMISSION IN VEHICLE

Removal and Installation

1. Raise the vehicle on a hoist and position safety stands under vehicle.

2. Disconnect the PNP switch electrical harness from the PNP switch. Lift the harness straight up off the switch (No lateral movement).

3. Using the neutral switch socket Tool T74P-77247-A remove the neutral start switch and O-ring seal.

4. Install a new O-ring seal on a new neutral start switch.

5. Lube seal with transmission fluid.

6. Install the PNP switch in the case using the neutral start switch socket Tool T74P-77247-A. Tighten to 11-15 Nm (8-11 ft-lb).

7. Connect the PNP switch harness to the new PNP start switch.

8. Remove safety stands and lower the vehicle.
pro multis · About Operation CHARM