Operation CHARM: Car repair manuals for everyone.

Radio/Stereo: Service and Repair

REMOVAL AND INSTALLATION
1. Disconnect battery ground cable.
2. Remove dash panel.
3. Install radio removal tool No. T87P-19061-A, or equivalent, to radio face plate.

Fig. 8 Raido Replacement:





4. Press tool inward to release radio clips, then pull radio from panel.
5. Disconnect antenna cable, speaker wires and power feed from rear of radio.
6. Remove radio rear support, then disconnect ground cable (electronic radio) and remove radio from vehicle.
7. Reverse procedure to install.