Manufacturer Code Charts: 9: 9.6

- Turn ignition OFF.

NOTE: When the battery ground cable has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the strategy.

- Reconnect battery ground cable.

- Verify all connectors are installed.

- Locate and disconnect the diagnostic connector from its mating half (Circuits 571 [BK/O] and 481 [R]).

- Turn ignition ON.

- Begin diagnostic trouble code flashout by connecting Circuit 571 (BK/O) to a chassis ground for at least 1 second.

- Can code be determined?

Diagnostic trouble code = 16 -- Go to Test Drive Code 16. 16

Diagnostic trouble code = 9 -- Go to 9.7. 9.7

Diagnostic trouble code is different than before -- Go to pinpoint test for corresponding code.