DT6.2 Measure Sensor Output

^ Put vehicle on hoist and raise so that the rear wheels can rotate freely.

^ Set an AC voltmeter on the 2000mV scale.

^ Remove the cap from the sensor test connector and connect the AC voltmeter across the connector leads.

^ Start the engine and turn the rear wheels at 5 mph.

^ Measure the voltage output of the sensor.

^ Do 650mV or more register?

YES -- Reinstall the sensor test connector cap. Go to DT6.3. DT6.3 Measure Sensor Air Gap

NO -- Reinstall the sensor test connector cap. Replace sensor. Go to Drive Test Code 16 to verify concern is resolved. Description